Technical Help, Installations and instructions

Atkinson Tankmaster Fitting Instructions

The TANKMASTER is supplied for connecting to 10mm dia oil line. See Note 2 below if other pipe sizes are to be fitted. THE TANK SHOULD BE INSTALLED WITH AT LEAST 30CM (ONE FOOT) CLEARANCE UNDER THE...

Atkinson Tank alarm Series – Combined Bund & Overfill Alarm

Model No TA1055: 9v BatteryOverfill/Bund Alarm   Installation ALL ELECTRICAL WIRING SHOULD BE PERFORMED BY A COMPETENT ELECTRICIAN.   1)       Install the probe into the tank as illustrated below. You will require 2 holes approximately 20mm (3/4”) Dia NOTE: When drilling holes...

Atkinson Tank alarm Series – 9v Battery Bund Alarm

Model No TA1050: 9v Battery Bund Alarm   Installation ALL ELECTRICAL WIRING SHOULD BE PERFORMED BY A COMPETENT ELECTRICIAN.   1)       Install the probe into the tank as illustrated below. You will require a hole approximately 20mm (3/4”) Dia NOTE: When drilling...

Atkinson Tank alarm Series – 230v 50Hz Mains Overfill Alarm

Model No TA1020: Mains Overfill Alarm   Installation ALL ELECTRICAL WIRING SHOULD BE PERFORMED BY A COMPETENT ELECTRICIAN.   1)       Install the probe into the tank as illustrated below. You will require a hole approximately 20mm (3/4”)  Diameter NOTE: When drilling holes...

Atkinson Tank Alarm Series – 9v Battery Overfill Alarm

ATKINSON EQUIPMENT LTD. Model No TA1010: 9v PP3 Battery Overfill Alarm   Installation ALL ELECTRICAL WIRING SHOULD BE PERFORMED BY A COMPETENT ELECTRICIAN.    1)     Install the probe into the tank as illustrated below. You will require a hole approximately 20mm...

Fitting The Atkinson Overfill Prevention Valve (GV4300)

Filstop Valve GV4300   Technical Specification Min Flow:                50 litre/min Max Flow:               580 litre/min Min Pressure:          0.15 PSI (10 mbar) Max Pressure:         100 PSI (7 bar) Installation 1)      Take out and assembly T Bar Installation tool. 2)       Ensure the storage tank is not...

Fitting The Atkinson Overfill Prevention Valve (GV4000)

Filstop Valve GV4000 Technical Specification Min Flow:                50 litre/min The Atkinson Filstop - Overfill Prevention Valve Max Flow:               580 litre/min Min Pressure:          0.15 PSI (10 mbar) Max Pressure:         100 PSI (7 bar) Installation Note: a 62mm (approx) Diameter hole is required to...

Frozen Condensate Pipes…….

Every winter hundreds of boilers in the UK stop working because their condensate (drain) pipe freezes solid... Until now there has been no solution to this problem of ice blocking the drain in freezing conditions... Frozen Condensate drain...