Tag - Atkinson Equipment

Replacing your Tankmaster Filter – Info Video

This is an instructional video on how to change the filter and seals on the integral filter unit on an Atkinson Tankmaster valve and sight gauge.   If you require a replacement filter kit for your Atkinson Tankmaster...

Read more...

Fighting Fuel Laundering

Fighting Fuel Laundering Three "pop-up" filling stations selling laundered fuel have been closed down in Belfast. John Whiting, HMRC's head criminal investigation for Northern Ireland, reported to the Northern Ireland Affairs Committee at Westminster that the sites...

Read more...

Oil Heating Equipment

Oil Heating Equipment What makes up a good oil central heating system? A good oil-fired central heating system will contain the same controls as a modern gas-fired system. In particular it should have: a room thermostat, ideally located...

Read more...

Fuel Transfer Pumps at Fueldump

Fuel Transfer Pumps   Here at Fueldump we now have available the complete range of FMT fuel transfer pumps. FMT are a Swiss/German company who produce only the best in fuel transfer pumps and flowmeters. As we all...

Read more...

Rural homeowners hit as heating oil thefts up 150%

Rural homeowners are being hit in the pocket twice by criminals as they fork out for replacement heating oil and clean-up costs due to damaged tanks, a leading insurer has revealed. And thieves have become so brazen...

Read more...

Atkinson’s Adblue Coupling…

Atkinson Equipment's New Adblue Dry Break Coupling ............ Atkinson Equipment has answered the call from tank manufacturers to supply an Adblue Dry Break Coupling for use on plastic and steel storage tanks. The requirement for the larger...

Read more...

Our new websites………

Welcome Fueldump Customers, We now have an ever growing range of websites based on individual products. All our sites are dedicated to the each product line. Designed to give a more detailed explanation and in depth product overview....

Read more...

Fitting The Atkinson Tanktop

Installing the Tanktop Steel Tank:  With the back nut still on, dress the Tanktop 1” BSP thread with PTFE tape. Thread the float and the suction pipe through the 1” BSPP nipple on the top of the tank...

Read more...

Atkinson Tankmaster Fitting Instructions

The TANKMASTER is supplied for connecting to 10mm dia oil line. See Note 2 below if other pipe sizes are to be fitted. THE TANK SHOULD BE INSTALLED WITH AT LEAST 30CM (ONE FOOT) CLEARANCE UNDER THE...

Read more...

Atkinson Tank alarm Series – 9v Battery Bund Alarm

Model No TA1050: 9v Battery Bund Alarm   Installation ALL ELECTRICAL WIRING SHOULD BE PERFORMED BY A COMPETENT ELECTRICIAN.   1)       Install the probe into the tank as illustrated below. You will require a hole approximately 20mm (3/4”) Dia NOTE: When drilling...

Read more...