Model No TA1050: 9v Battery Bund Alarm Installation ALL ELECTRICAL WIRING SHOULD BE PERFORMED BY A COMPETENT ELECTRICIAN. 1) Install the probe into the tank as illustrated below. You will require a hole approximately 20mm (3/4”) Dia NOTE: When drilling...
Model No TA1020: Mains Overfill Alarm Installation ALL ELECTRICAL WIRING SHOULD BE PERFORMED BY A COMPETENT ELECTRICIAN. 1) Install the probe into the tank as illustrated below. You will require a hole approximately 20mm (3/4”) Diameter NOTE: When drilling holes...
ATKINSON EQUIPMENT LTD. Model No TA1010: 9v PP3 Battery Overfill Alarm Installation ALL ELECTRICAL WIRING SHOULD BE PERFORMED BY A COMPETENT ELECTRICIAN. 1) Install the probe into the tank as illustrated below. You will require a hole approximately 20mm...
Filstop Valve GV4300 Technical Specification Min Flow: 50 litre/min Max Flow: 580 litre/min Min Pressure: 0.15 PSI (10 mbar) Max Pressure: 100 PSI (7 bar) Installation 1) Take out and assembly T Bar Installation tool. 2) Ensure the storage tank is not...
Filstop Valve GV4000 Technical Specification Min Flow: 50 litre/min The Atkinson Filstop - Overfill Prevention Valve Max Flow: 580 litre/min Min Pressure: 0.15 PSI (10 mbar) Max Pressure: 100 PSI (7 bar) Installation Note: a 62mm (approx) Diameter hole is required to...
The new B30K fuel will be a mix of 30% FAME bio-fuel and 70% kerosene, and can be used on existing oil heating appliances with very few system modifications. It is estimated that carbon emissions from the B30K fuel...
Every winter hundreds of boilers in the UK stop working because their condensate (drain) pipe freezes solid... Until now there has been no solution to this problem of ice blocking the drain in freezing conditions... Frozen Condensate drain...
The biggest problem by far with storing large quantities of oil is the risk of pollution. Nothing illustrates this more than the oil pollution caused by the explosion on the BP oil rig in the Gulf of...
Draught Stabilisers In almost all heating installations, the draught created in the chimney is greater than that required by the boiler flue. The draught can vary from 0 up to 100 Pa during the heating season. The...
Why does gas build up in the oil line? Gas will automatically be released from the oil when pressure in the oil line falls below the atmospheric pressure resulting in a vacuum (negative pressure). The quality, temperature...
