Atkinson Tankmaster Filter Replacement Kit
TANKMASTER SPARE![ATKINSON EQUIPMENT 1](https://www.fueldump.co.uk/wp-content/uploads/2020/03/ATKINSON-EQUIPMENT-1.png)
- Our best seller – servicing your Tankmaster yearly is important to keep the oil feeding the burner clean and to stop the filter clogging up and creating a blockage.
£4.64 £5.57
- Description
- Additional information
- Video Guide
- Reviews (21)
Description
TANKMASTER REPLACEMENT FILTER KIT
Complete kit for servicing the filter on your Tankmaster, containing nylon filter and o-rings for top and bottom of the filter bowl.
This kit is designed for the Mark II Tankmaster; however, if a filter replacement kit is required for a Tankmaster Mark I then you can use this kit by placing a small (2″) cable tie around the tube immediately below the filter so as to hold this up against the body of the Tankmaster.
Tip – Cleaning the filter element to reuse it it not recommended. The cleaning fluid can leave a film over the surfaces of the nylon element, which effectively reduces the size of the holes in the mesh. Although the filter will look clean, the reduction in the size of the holes in the mesh will act in the same way as if the filter was still dirty/clogged.
Tip – The ‘O’ ring supplied for going around the bolt at the bottom of the filter housing is tapered on one edge and must be fitted with this tapered edge facing uppermost (i.e. facing towards the filter bowl). This usually compresses into a flat shape so that when this is removed again for servicing the service engineer thinks that he requires a flat washer and has been supplied the wrong part (this is not the case)
Note: When fitting a new filter, the flat side fits uppermost against the Tankmaster body, whilst the domed side fits downward so that this follows the contours of the filter bowl.
Please see the helpful video guide on how to replace your Tankmaster filter above (video guide tab).
See our full Atkinson Tankmaster Valve & Spares range for more extras for your Tankmaster.
Additional information
Weight | 0.2 kg |
---|
T Squirrell –
Easily fitted with no problem.
J Paszkiewcz –
Arrived speedily, fitted and working!
J Scott-smith –
As it appears to be identical to the original, having been supplied by the same supplier, I can’t see any reason not to give it full marks overall.
C Gillett –
Does the job though would have appreciated simple instructions for the layman.
Michael –
Simply wonderful
P Aindow –
Not used yet, but looks the part
G Moore –
Fitted easily. Apart from a bit of a devil to prize the old o ring out, and you need to really tighten the nut back on beyond the resistance you feel as you need to deform the plastic seal to stop oil leaking out of the bell.
Roger –
Very good value for money. Fitted perfectly. Received items the next day
P Jones –
Excellent service
R Sawyer –
Excellent – solved the leak! Thank you for prompt service.
Anonymous –
Great filter, great price. O rings difficult to install
A Stuart –
Did what I needed it to do.
Neil –
Quality product at a fair price.
Mr Davies –
Easy to change and worth doing every time the tank is filled or at the system’s annual service.
P John –
i have not used the product yet but the staff were great and got the filter organised within 24hours
Tim –
All good fitted well
D Cox –
I am relatively new to Oil fired heating and have inherited a tank which seems to grow brown algae, so having the ability to do an annual filter change at the tank valve after I’ve “vacuumed” out the bottom of the tank is useful in preventing contamination reaching the boiler.
Anonymous –
Good product delivered quickly
J Richardson –
The kit has solved the leak. The video was brilliant, showing clearly how to change the filter and washers- I’m a female and did this myself.
R Tuck –
Good product, delivered quickly
Anonymous –
Good service