Atkinson Tankmaster O-Ring Kit

Description

Atkinson Tankmaster O-Ring Kit

ATKINSON TANKMASTER VALVE 4-IN-1 SIGHT GAUGE

The Atkinson Tankmaster valve has been the industry standard fuel storage tank contents gauge for over 60 years. British engineering at its best, we support the valve with the complete range of spares so you can rely on the fact that its fully serviceable. With simple operational functions that has made the valve an firm favourite for an installation engineer and homeowner alike. The pull to read button to get your fuel level is straight forward and relies on fluid physics and not electronic parts like most contents gauges nowadays. A fully replaceable filter to ensure that only clean fuel reaches your boiler. The gauge also acts as an isolation valve when things need to be serviced.

1. Control Valve to turn on/off oil supply;
2. Pull to Read Valve/Sight Tube allows inspection of tank contents level;
3. Integral Filter to ensure only clean oil is allowed to pass from the tank;
4. Self-Closing Hand Wheel isolates oil supply in case of fire near the tank.

Complete Tankmaster ‘O’ Ring kit – Contains all 9 ‘O’ Rings used in the Tankmaster Mark I and Mark II. Note: Not all ‘O’ Rings can be used unless the Tankmaster is completely taken apart, including servicing of the central oil flow control shaft (which is best done in the factory).

If you do decide to service the ‘O’ rings on the central control valve then look at the cut away picture of the control valve to establish the correct sequence for reassembly of the spring movement, washers, etc. Please see the helpful cut-away image of the Tankmaster valve above.

In addition to the Atkinson Tankmaster O-Ring Kit we supply the full range of spares for the valve here – Atkinson Tankmaster Spares

Additional information