Hose Kit for Fuel Transfer Pump

FMT Battery Kit1  70399 zoom 1

Hose Kit for Fuel Transfer Pump

From £37.50 £45.00

In stock
FEATURES OF THE HOSE KIT FOR FUEL TRANSFER PUMPS:ATKINSON EQUIPMENT 1
  • Prebuilt hose kit for your transfer pump
  • Available with 3/4″ or 1″ Hose to suit pumps with 3/4″ or 1″ inlet/outlet
  • Comes with 4.6m hose, can be cut to suit application (suction/delivery)

From £37.50 £45.00

SKU: P-HOSEKIT-46
Clear

Description

HOSE KIT FOR FUEL TRANSFER PUMPS

NOTE: PUMP SHOWN FOR ILLUSTRATION PURPOSE ONLY

Available with 3/4″ or 1″ Hose to suit pumps with 3/4″ or 1″ inlet/outlet.

Comes complete with a single length of hose, which can be cut to suit your own specific requirements (e.g. allow say 1.6 metres for the suction and 3 metres for the delivery sides of the pump).

Everything you need is included in the kit:

 Hose length: 4.6 Metres Available in either 3/4″ or 1″ ID, Cloth Reinforced Nitrile
 Nozzle Type: Manual Aluminium c/w brass swivel
 Hose Tails: 4 These are sized to fit the Hose/Pump/Nozzle/Non-return Valve
 Jubilee Clips: 4 Appropriately sized to fit Hose/Hose Tails
 Non-Return Valve: 1 The Non-return Valve and Strainer comes complete
 Strainer: 1 Comes integral with the Non-return Valve (500 micron)
 PTFE Tape: 1 Roll of PTFE tape sufficient to make all joints – 12M x 12mm x 0.075mm

Additional information

Weight2 kg

Reviews

There are no reviews yet.


Be the first to review “Hose Kit for Fuel Transfer Pump”