Loading... Please wait...



Atkinson TankTop, Top Off Take Valve

RSS New Products

Our Newsletter

Atkinson Tanktop, Top Offtake Valve

Part Code:
1.6m Floating Suction Tube
Floating Suction Head
Diaphragm Anti Siphon Valve
Non Return Valve
50 Micron Filter
Anti-Spill Valve
Purging/Priming Button
- :
Weather Proof Cap
Surface Gasket
Tank Inlet Fitting 1" BSPM
10mm Push Fit Hydraulic Connector
Factory Set:
150mb Negative Head
Bespoke Setting:
If other pressure required between 0-600mb please fill in box below
£76.50 (exc VAT) £91.80 (inc VAT)
  • Plastic Tank Version
  • Steel Tank Version
Required Setting (in millibars):
Product Options:

Product Accessories

Atkinson Tanktop, Top Offtake Device

Steel and plastic tank versions now available

Draw oil from your tank safely with the new Atkinson Tanktop, Top Offtake System.

Leading the way into the world of Top Offtake, the Atkinson Tanktop is the WORLDS FIRST AND ONLY Top Offtake device with all of the necessary features and functions to responsibly draw oil from the top of a tank.   EC Reg. Des. No: 000472493-0001.

This innovative product has all the components required for drawing fuel oil from the top of the storage tank in one unit (no joints to leak oil out or air in). It incorporates all of the following into one neat, easy to install, unit:

  • Floating Suction Head
  • Floating Suction Tube (1.6M)
  • Non Return Valve
  • 50 Micron Filter
  • Diaphragm Anti-siphon Valve
  • Anti-spill Valve
  • Tank Inlet Fitting 1" BSPM
  • Purging / Priming Button
  • Surface Gasket
  • Totally Waterproof

With Top Offtake it is imperative that joints are well made so with only one joint to make, the Atkinson Tanktop is the answer to an Engineer's dream.

This product draws on over 40 years experience of manufacturing products for the oil heating market. The product incorporates an anti-siphon valve to prevent fuel siphoning from the tank in the event the oil line is broken thus avoiding environmental pollution (incurring heavy fines and clean-up costs).

Designed for the 21st century, where the demand is for a system that avoids breaching the bund on an oil storage tank and thus minimising the risk of environmental pollution, as supported by the Environment Agencies and OFTEC.

Now with 10mm push-fit hydraulic connector for simple fitting (blue connector shown in photograph) inside the restrictive space of the bund - simply push the 10mm oil pipe into place. No screwing and making the joint air-tight required whatsoever.

Important Note: The pressure is pre-set in the factory at a 150 mb negative head and this is not adjustable by the user (suitable for all known boilers on the market).  If you require this to be pre-set to any other pressure between 0-600 mb then you will need to let us know at the time of your order and we will pre-set this for you before dispatch, Please fill in the box above.

It is also recommended you have a Deaerator in your oil line.