Atkinson 2 Inch Locking Filler Cap For Oil Tank

Description

ATKINSON 2″ LOCKING FILLER CAP

This Atkinson Equipment designed locking filler cap is to secure your fuel storage tank from fuel theft, the clever design means that the cap cannot be removed until a padlock is unlocked and removed.

Locking cap for an oil storage tank filler point. The bottom threaded ring goes over the 2″ threaded outlet on your tank and is then secured by the brass shear screw. The top cap then lines up with the elbow locking tab and is secured further by a padlock (not supplied)

FITTING:- Screw on the locking ring first, Do not tighten the shear screw until you have then screwed on the cap and lined up the elbow locking tab, fit your padlock, then tighten the brass shear screw to until the head breaks off to secure the locking ring in place.

Strong aluminium construction cap with a hardened steel locking elbow and a brass shear screw.

The 2″ Locking Filler Cap is designed for most standard fuel storage tank filling points on the market.

Other ways to secure your fuel tank would be to install motion detecting lighting near the tank, also some strategic planting of shrubs and plants can also make it difficult to access the tank. There are a few other products such as locking vent caps, locking valves and brackets that can be employed to help secure your fuel tank.

For more fuel tank security products see here – Fuel Tank Security

Additional information