Tag - heating oil

Guide to Domestic Oil Supply Pipes

Domestic Oil Supply Pipes This guide applies to pipe work systems supplying kerosene to oil fired equipment under 45kW output serving single family dwellings. Oil Supply Systems There are two types of oil feed systems; gravity and sub-gravity. Gravity...

Guide to Domestic oil fired appliances and systems

Domestic Oil Fired Appliances and Systems This guide refers to all types of oil fired appliances including boilers, cookers and stoves and outlines the basic principles of these appliances. Appliance Types Designed to be strong and long lasting, oil...

Guide to Domestic Oil Storage

Domestic Oil Storage This guide applies to oil storage tanks up to 3500 litres capacity supplying oil to single family dwellings for heating and cooking purposes. Depending on where you live, regulations may vary slightly. The information here...

Flues, Chimneys and Ventilation

Guide to Flues, chimneys and ventilation The guide applies to flues, chimneys and ventilation required for any oil fired appliance, including boilers, cookers and stoves used in the home, by the use of draught stabilisers and flue...

Heating Oil Filters and Fuel Filters

Fuel Filters We supply two main types of filters, heating oil filters and fuel filters. The heating oil  filters we do are inline filters, these are generally a complete unit that goes inline on your feed pipes. The...

Our new websites………

Welcome Fueldump Customers, We now have an ever growing range of websites based on individual products. All our sites are dedicated to the each product line. Designed to give a more detailed explanation and in depth product overview....

Fitting The Atkinson Tanktop

Installing the Tanktop Steel Tank:  With the back nut still on, dress the Tanktop 1” BSP thread with PTFE tape. Thread the float and the suction pipe through the 1” BSPP nipple on the top of the tank...

Atkinson Tankmaster Fitting Instructions

The TANKMASTER is supplied for connecting to 10mm dia oil line. See Note 2 below if other pipe sizes are to be fitted. THE TANK SHOULD BE INSTALLED WITH AT LEAST 30CM (ONE FOOT) CLEARANCE UNDER THE...

Atkinson Tank alarm Series – Combined Bund & Overfill Alarm

Model No TA1055: 9v BatteryOverfill/Bund Alarm   Installation ALL ELECTRICAL WIRING SHOULD BE PERFORMED BY A COMPETENT ELECTRICIAN.   1)       Install the probe into the tank as illustrated below. You will require 2 holes approximately 20mm (3/4”) Dia NOTE: When drilling holes...