Tag - Fuel deliveries

Fighting Fuel Laundering

Fighting Fuel Laundering Three "pop-up" filling stations selling laundered fuel have been closed down in Belfast. John Whiting, HMRC's head criminal investigation for Northern Ireland, reported to the Northern Ireland Affairs Committee at Westminster that the sites...

Pay As You Go… for heating oil customers

Pay As You Go Northern Ireland Minister for social development, Nelson McCausland, has given the go ahead for trials of a new "pay -as-you-go" system for heating oil customers. At present there are pay-as-you-go schemes for both electricity...

Protecting your heating oil from theft

 Heating Oil Storage Tank Security Protect your oil tank Protect your oil tank with the following crime prevention advice offered by Norfolk Police: · Position your oil tank to allow maximum view from your property – this may...

Fuel Transfer to Iced in City a success !

ANCHORAGE, Alaska—A Russian tanker that went on an ocean odyssey of 5,000 miles to deliver fuel to the iced-in city of Nome was offloading the gasoline and diesel in what officials say is smooth sailing so...

Fuel Transfer Pumps at Fueldump

Fuel Transfer Pumps   Here at Fueldump we now have available the complete range of FMT fuel transfer pumps. FMT are a Swiss/German company who produce only the best in fuel transfer pumps and flowmeters. As we all...

Atkinson Tank alarm Series – Combined Bund & Overfill Alarm

Model No TA1055: 9v BatteryOverfill/Bund Alarm   Installation ALL ELECTRICAL WIRING SHOULD BE PERFORMED BY A COMPETENT ELECTRICIAN.   1)       Install the probe into the tank as illustrated below. You will require 2 holes approximately 20mm (3/4”) Dia NOTE: When drilling holes...

Atkinson Tank alarm Series – 9v Battery Bund Alarm

Model No TA1050: 9v Battery Bund Alarm   Installation ALL ELECTRICAL WIRING SHOULD BE PERFORMED BY A COMPETENT ELECTRICIAN.   1)       Install the probe into the tank as illustrated below. You will require a hole approximately 20mm (3/4”) Dia NOTE: When drilling...

Atkinson Tank alarm Series – 230v 50Hz Mains Overfill Alarm

Model No TA1020: Mains Overfill Alarm   Installation ALL ELECTRICAL WIRING SHOULD BE PERFORMED BY A COMPETENT ELECTRICIAN.   1)       Install the probe into the tank as illustrated below. You will require a hole approximately 20mm (3/4”)  Diameter NOTE: When drilling holes...