3/8″ Water Trap Filter for Heating Oil

Description

WATER TRAP FILTER FOR HEATING OIL

Now there is a filter that allows you to easily drain off any water collected from your heating oil.

When you see any trapped water in the filter bowl simply open a valve to drain this off.

Works as a particulate filter with the facility to view and drain off trapped water.

The filter is available with a wall bracket and 2x compression fittings to allow you to connect it to your pipework. A roll of PTFE jointing tape can also be supplied.

We also supply the replacement filter elements and the O-ring seal for the filter bowl.

All of these items can be added to your order using the drop menus above.

Many people also select to connect an isolation valve before or after their filter so they can isolate the oil flow when changing the filter element, these can be found here – Inline Isolation Valve

Dimensions of the filter:

80mm across the top – from inlet port to outlet port.

136mm from the top of the filter to the bottom of the small drain tap.

Additional information

SPECIFICATION SHEET