Bottom Outlet Filter Valve – AFV-1000

afv 10000  68106

Bottom Outlet Filter Valve – AFV-1000

From £4.64 £5.57

In stock
FEATURES OF THE AFV-1000 INLINE FILTER VALVE:ATKINSON EQUIPMENT 1
  • For use on bottom outlet steel or plastic tanks
  • Includes PTFE Tape and Heldite for fitting
  • 50 micron filter included
  • Service kit available

From £4.64 £5.57

SKU: AFV-1000
Clear

Description

BOTTOM OUTLET FILTER VALVE

Often supplied as standard with most major plastic tank manufacturers. For use on steel or bottom outlet plastic domestic heating oil tanks.

The tank must be installed with at least enough clearance beneath the filter bowl to allow for maintenance of the filter, including room for a tray to collect any spillage.

This Filter valve has been fully tested and was in full working order upon leaving our works; reasonable care in fitting and subsequent servicing will ensure trouble free operation.

Featuring an isolation valve, 50 micron nylon filter element, 1″ BSP male tank-fitting adaptor.

The outlet is 3/8″ BSP Female and this comes supplied with a 3/8″ BSP Male to 10mm compression fitting as standard.

Comes supplied c/w a roll of PTFE tape and a 10mm plastic bottle of Heldite for the tank connection.


Tip: For filter replacement make sure you use the AFV-1000-KIT Element listed in the drop down menu by product required below, because this comes with ‘O’ rings having the correct profile.  Using any other filter replacement kit could result in a poor seal and consequential leakage.

Additional information

Weight2 kg

2 reviews for Bottom Outlet Filter Valve – AFV-1000

  1. 5 out of 5

    D Veitch

    It was much better quality and easier to fit than the one that was originally on the tank

  2. 5 out of 5

    Mike

    As advertised and arrived next day


Add a review