OL-3L Oil Up Feeder

Product Information

OL-3L Oil Up Feeder (Oil Lifter)

Used to ensure a head of oil above the burner to provide a gravity feed supply. Inbuilt pump and micro switches call for oil when the reservoir gets low and switches itself off when full.

Maximum lift is 8 metres and the maximum distance to the oil tank is 100 metres.

Pump Type	Suction Solenoid Pump
Lifting Height (Maximum)	8M Vertical (using 8mm ID Tube)
Maximum Horizontal Distance	100M (using 8mm ID Tube)
Outlet Flow Rating (8mm ID Tube)	8 lph @ 8M Vertical & 25M Horizontal 15 lph @ 5M Vertical & 25M Horizontal
Inlet Connection	3/8" BSP Female
Outlet Connection	3/8" BSP Female
Overflow Outlet Connection	1/2" BSP Female
Power Supply	AC 230V, 50 Hz
Power Consumption	50 W
Reservoir Total Capacity	3.5 Litre
Dimensions	240 x 125 x 300 mm
Weight	3 kg
Fuel Type	Kerosene & Diesel Oil

Inpro OUF-88 Oil Up Feeder (Oil Lifter)

Tip on how to read the chart: 1) Draw a horizontal line level with the height of the burner (on left-hand axis); 2) Draw a vertical line level with the distance from your tank (on the bottom axis); 3) Identify the colour of the band where the two lines intersect; 4) Compare the colour of the band with the legend shown to the right of the chart. This will tell you the litres per hour that you can expect to achieve with your configuration (based on using 10mm OD oil pipe).

OL-3L Drip Tray: Also available is a DRIP TRAY that comes complete with an automatic LEAK DETECTOR, TGPG123, that plugs directly into the OL-3L Oil Lifter. When a leak is detected by the sensor in the drip tray the oil pump in the lifter will be isolated and prevented from operating. Also a warning light will flash on the oil lifter.

OL-3L Drip Tray